perm filename TRIP.FOT[TUG,DEK]2 blob
sn#680533 filedate 1982-10-15 generic text, type T, neo UTF8
This is TeX, Version 0.3 (INITEX)
** &trip trip
(TRIP.TEX
Completed box being shipped out [0.0.0.0.11]
! Missing number.
<to be read again>
\outputpenalty
<write> ...umber \outputpenalty
}
<to be read again>
} \endwrite
l.106 \penalty-10000
% now the default output routine will act
Memory usage before: 139&240; after: 87&226; max so far: 151&319
! Infinite glue shrinkage inserted from \skip 100.
l.130 \vbox expand 1000pt{}
% beginning of new page
Overfull \hbox (2.0pt too wide) in paragraph at lines 140--140
[]\:20 A|
Overfull \hbox (2.0pt too wide) in paragraph at lines 140--140
[]\:20 A|
Overfull \hbox (2.0pt too wide) in paragraph at lines 140--140
[]\:20 A|
Overfull \hbox (2.0pt too wide) in paragraph at lines 145--148
[]\:20 A|
Overfull \hbox (2.0pt too wide) in paragraph at lines 145--148
\:20 A|
! OK.
l.149 ...nalty99999999\showlists
! \box255 is not absent.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
Overfull \vbox (987.0pt too high) has occurred while \output is active
Completed box being shipped out [-5000.0.0.0.11.53110375]
Memory usage before: 715&401; after: 561&398; max so far: 760&404
! OK.
<output> ...unbox 255\showlists
\message {\topmark :\firstmar...
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
:alpha:3:alpha:alpha
! \output routine didn't use all of \box255.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
! Infinite glue shrinkage inserted from \skip 100.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
Underfull \vbox (badness 3312) detected at line 150
Completed box being shipped out [10000.0.0.0.11.65536]
Memory usage before: 465&387; after: 280&383; max so far: 760&418
! OK.
<output> ...unbox 255\showlists
\message {\topmark :\firstmar...
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
3:1:3:1:3
! \output routine didn't use all of \box255.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
Overfull \vbox (4012.0pt too high) detected at line 150
Overfull \vbox (959.0pt too high) has occurred while \output is active
Completed box being shipped out [-333.0.0.0.11.655360000]
Memory usage before: 208&376; after: 141&375; max so far: 760&418
! OK.
<output> ...unbox 255\showlists
\message {\topmark :\firstmar...
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
3:3:3::
! \output routine didn't use all of \box255.
<to be read again>
\hbox
l.150 ...1000pt\penalty-333\hbox
to 23pt{} % output goes into...
! Dimension too large.
l.151 \global\vsize=100000pt
% everything else will fit on ...
[-333.0.0.0.11]
> A\insert 200{\baselineskip 400pt \hbox {}\hbox to -10pt{}} \advcount 1
5by1\mark {\the \count 15} \paR \gobble .
l.154 \showthe\everypar
> .
l.155 ...ypar{}\showthe\everypar
\showthe\minusthe\everypar
! Improper use of \the.
l.155 ...owthe\minusthe\everypar
> 0.
l.155 ...owthe\minusthe\everypar
Underfull \vbox (badness 10000) detected at line 164
> -12345.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.164 \penalty -12345
% output the remaining stuff
Completed box being shipped out [-2.0.0.0.11]
Memory usage before: 114&270; after: 98&270; max so far: 760&418
Tight \hbox (badness 30) in paragraph at lines 183--183
[] [] []
Loose \hbox (badness 30) in paragraph at lines 183--183
[] []
Loose \hbox (badness 51) in paragraph at lines 184--184
[] []
Underfull \hbox (badness 10000) in paragraph at lines 171--187
[] [][][]
> -22222.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.191 \penalty-22222
% end of demerits test, hyphenation is next
Completed box being shipped out [-2.0.0.0.11]
Memory usage before: 926&293; after: 548&287; max so far: 938&418
Underfull \hbox (badness 10000) in paragraph at lines 200--200
[] \:20 BBBBBB
Underfull \hbox (badness 10000) in paragraph at lines 201--201
[] \:20 BB-B-BBB
Underfull \hbox (badness 10000) in paragraph at lines 202--202
[] \:20 BBB-BBB
Underfull \hbox (badness 10000) in paragraph at lines 203--203
[] \:20 BBBBBB
Underfull \hbox (badness 10000) in paragraph at lines 195--204
[]\:20 A /AA-B-BBBC-ACAC//
! Missing $ inserted.
<to be read again>
↑
l.206 \scriptscriptfont3 30↑
{}$\scriptfont3=20 \texinfo 30 2=0pt
! Math formula deleted: Insufficient extension fonts.
l.206 \scriptscriptfont3 30↑{}$
\scriptfont3=20 \texinfo 30 2=0pt
! Math formula deleted: Insufficient symbol fonts.
l.210 \mathsurround143pt$
C $\mathsurround40pt$$\mathsurrou...
! Infinite glue shrinkage found in a paragraph.
l.210 ...round60pt\hbox{$$}$\par
}
Loose \hbox (badness 76) in paragraph at lines 206--210
[]$$\:20 A
Loose \hbox (badness 94) in paragraph at lines 206--210
\:20 -
Tight \hbox (badness 12) in paragraph at lines 206--210
\:20 C$$
Loose \hbox (badness 71) in paragraph at lines 206--210
\:20 C
Tight \hbox (badness 57) in paragraph at lines 206--210
[]$
(TRIPOS.TEX
! Missing number.
<to be read again>
\uppercase
l.3 \uppercase
{mmmmmmmmmm}
Underfull \hbox (badness 10000) in paragraph at lines 2--4
[]\:20 AAAAAAAAAA
)
> -33333.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.212 \penalty-33333
% end hyphenation, math is next
Completed box being shipped out [-2.0.0.0.11]
Memory usage before: 888&444; after: 509&363; max so far: 938&448
! Font 20 is already defined to be trip.
l.215 \font 20 trip at 11pt
% whoops
! Font 20 is already defined to be trip.
<to be read again>
\font
l.217 \font
100 xyzzy % nonexistent
! Font 100=xyzzy not loadable: Metric (TFM) file not found.
<to be read again>
\font
l.218 \font
100=trip at 2047.99998pt
! Invalid code (-1), should be in the range 0..299.
<to be read again>
=
l.219 \font -1=
trip at -1pt % through the looking glass
! Improper `at' size (-1.0pt), replaced by 10pt.
l.219 \font -1=trip at -1pt
% through the looking glass
! Improper alphabetic constant.
<to be read again>
\relax
l.249 ...mber\the\delcode`\relax
\over{{{}}}}\showlists % this...
! Extra }, or forgotten $.
l.249 ...code`\relax\over{{{}}}}
\showlists % this is rather e...
! OK.
l.249 ...x\over{{{}}}}\showlists
% this is rather erroneous
! Improper \halign inside $$'s.
l.250 \halign
to\the\displaywidth{#\cr\cr} % the display coun...
Underfull \hbox (badness 10000) detected at line 250
[]
! Missing $$ inserted.
<to be read again>
\eqno
l.254 \eqno
% another error (actually causes two error messag...
> -1245184.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
<to be read again>
\eqno
l.254 \eqno
% another error (actually causes two error messag...
Completed box being shipped out [-2.0.0.0.11.0.327680]
Memory usage before: 327&333; after: 228&325; max so far: 938&448
! You can't use `\eqno' in horizontal mode.
l.254 \eqno
% another error (actually causes two error messag...
! Missing delimiter (. inserted).
<to be read again>
\relax
l.256 $\right\relax
\mathchardef\minus="322D % locally \minus ...
! Extra \right.
<to be read again>
\relax
l.256 $\right\relax
\mathchardef\minus="322D % locally \minus ...
! Missing number.
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
! Illegal unit of measure (pt inserted).
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
! Missing delimiter (. inserted).
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
! Missing delimiter (. inserted).
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
! Ambiguous; you need another { and }.
<to be read again>
?
l.257 ...over A\abovewithdelims?
\right(+\mskip1A\minus=A+\pen...
! Illegal unit of measure (mu inserted).
<to be read again>
A
l.257 ...delims?\right(+\mskip1A
\minus=A+\penalty+1000A
! \scriptfont 0 is undefined (character ?).
l.260 \mathsurround.11em$
% this formula goes on line 7
! Bad number (-1).
<to be read again>
}
l.269 ...the\scriptscriptfont-1}
}}}}
! Missing { inserted.
<to be read again>
\radical
l.272 \mathord \radical
"161 % missing { will be inserted
! \nonscript must be followed by glue.
<to be read again>
\textstyle
l.275 ...h|{\nonscript\textstyle
\nonscript\mskip9mu minus1fil
! Improper discretionary list.
l.277 ...retionary{-}{\:30A\hss}
{\:30A}
! Illegal math \discretionary.
l.277 ...ry{-}{\:30A\hss}{\:30A}
> \penalty=\mathchar'21455.
l.284 \show\penalty
! OK.
\showlonglists ...99 \showlists
}
l.285 \showlonglists
$$ % end of the hairy display, missing ...
! Missing } inserted.
<to be read again>
}
<to be read again>
$
l.285 \showlonglists$
$ % end of the hairy display, missing ...
! \scriptscriptfont 13 is undefined (character A).
l.285 \showlonglists$$
% end of the hairy display, missing ...
Overfull \hbox (41.64128pt too wide) detected at line 285
[][] [] [] [] []|
> -1245184.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.285 \showlonglists$$
% end of the hairy display, missing ...
Completed box being shipped out [-2.0.0.0.11.0.327680]
Memory usage before: 2057&420; after: 1116&368; max so far: 2111&448
! Bad space factor (0).
l.289 \spacefactor=0
Underfull \hbox (badness 10000) in paragraph at lines 285--290
[]
Underfull \hbox (badness 10000) in paragraph at lines 285--290
[]
! Extra }, or forgotten \groupend.
l.291 }
% this fails to match \groupbegin
! Improper use of \the.
l.293 \mark{\the\spacefactor
} % \spacefactor: not in vertical...
Underfull \hbox (badness 10000) in paragraph at lines 294--294
[]
! You can only define a control sequence.
<to be read again>
A
l.298 \leqno\mathchardef A
\/$$
> -1245184.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.298 \leqno\mathchardef A\/$$
Completed box being shipped out [-2.0.0.0.11.0.327680.1572864.0.-1073741
823]
! Improper use of \the.
<write> \the \spacefactor
<to be read again>
} \endwrite
<to be read again>
}
<output> ...5\shipout \copy 254}
\ifabsent 254{\relax } \else...
l.298 \leqno\mathchardef A\/$$
0
Memory usage before: 449&331; after: 295&328; max so far: 2111&448
Loose \hbox (badness 62) in paragraph at lines 302--303
[]\:0 A ['202]
! Display math should end with $$.
<to be read again>
\par
l.303 ...e\leqno\kern1009pt$\par
> -1245184.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
<to be read again>
\par
l.303 ...e\leqno\kern1009pt$\par
Completed box being shipped out [-2.0.0.0.11.0.327680.1572864.1073741823
.-1073741823]
Memory usage before: 222&321; after: 165&319; max so far: 2111&448
! OK.
l.304 \showlists
Overfull \hbox (3.0pt too wide) in paragraph at lines 308--308
[]\:0 A A A|
Tight \hbox (badness 12) in paragraph at lines 308--308
\:0 A A
Tight \hbox (badness 12) in paragraph at lines 309--309
\:0 A A
Underfull \hbox (badness 101) detected at line 312
Loose \hbox (badness 56) in paragraph at lines 315--316
[]\:0 A
Underfull \vbox (badness 10000) detected at line 316
> -1.0pt.
l.317 ...astbox\showthe\lastskip
% \lastskip=-1pt (\baselines...
! OK.
<to be read again>
}
l.318 ...the\lastskip\showbox22}
Underfull \vbox (badness 10000) detected at line 318
! OK.
l.319 \showbox22
> \botmark=\botmark:
0.
l.320 \show\botmark
Loose \hbox (badness 44) in paragraph at lines 322--324
[][]\:0 A A
Overfull \vbox (0.50002pt too high) detected at line 324
> -2147483647.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.325 \penalty-2147483647
% that's the largest value TeX will...
Completed box being shipped out [-2.0.0.0.11.196608.327680.1572864.10737
41823.-1073741823]
Memory usage before: 630&346; after: 400&332; max so far: 2111&448
! Number too big.
l.326 \penalty-2147483648
% see?
! Illegal preamble.
l.331 ...pand-12.truedd{#\A\span
&
! Only one # is allowed per tab.
<argument> ##
\d #1\d ->#1#1
l.333 ...s7200bp minus 4wd4\d#\d
\cr % \d#\d becomes (erroneou...
Loose \hbox (badness 86) in paragraph at lines 337--337
[]\:0 AA
Loose \hbox (badness 86) in paragraph at lines 337--337
[]\:0 A
Overfull \vbox (26.49995pt too high) detected at line 337
AIX AIX
! \count 2=-1118806.
<to be read again>
}
l.341 ...e{\count2=\the\count2}}
Tight \hbox (badness 30) detected at line 342
[] [] []
! \prevdepth =20.0pt.
l.343 ...evdepth=\the\prevdepth}
> -88888.
<output> ...wthe \outputpenalty
\showboxbreadth 9999 \showbox...
l.344 \penalty-88888
% end alignment test, now miscellaneous ...
Completed box being shipped out [-2.2.-1118806.0.11.196608.327680.157286
4.1073741823]
Memory usage before: 573&337; after: 352&331; max so far: 2111&448
! You can't use a prefix with `\unskip'.
<to be read again>
\unskip
l.345 \global\unskip
\lastbox
! You can't use `\unskip' in vertical mode.
l.345 \global\unskip
\lastbox
! You can't use `\lastbox' in vertical mode.
l.345 \global\unskip\lastbox
! Bad number (16).
<to be read again>
=
l.346 \textfont16=
1000
! Font number 1000 has not been defined.
l.346 \textfont16=1000
! You can't use \long or \outer with `\let'.
l.347 \outer\let
\setdimen=:\def?
! You can use \let only with control sequences.
<to be read again>
:
l.347 \outer\let\setdimen=:
\def?
! You can only define a control sequence.
<to be read again>
?
l.347 \outer\let\setdimen=:\def?
> -16383.99998pt.
l.348 ...77777sp\showthe\dimen5
% this should be OK
! Dimension too large.
l.349 \setdimen6=-'40000pt
\showthe\dimen6 % this should overflow
> -16383.99998pt.
l.349 ...40000pt\showthe\dimen6
% this should overflow
> -8355.74998pt.
l.350 ...=.51dm5\showthe\dimen7
\multdimen7 by 2\showthe\dimen7
! Arithmetic overflow.
<to be read again>
\showthe
l.350 ...multdimen7 by 2\showthe
\dimen7
> -8355.74998pt.
l.350 ...en7 by 2\showthe\dimen7
! Undefined control sequence.
l.351 \a↑↑@↑↑@a
@ % an undefined control sequence followed by ...
! Text line contains an invalid character.
l.351 \a↑↑@↑↑@a@
% an undefined control sequence followed by ...
! Undefined control sequence.
\b ->\c
l.352 ...f\b{\c} \def\c{} \b} \b
% \c is undefined outside th...
! Parameters must be numbered consecutively.
<to be read again>
8
l.356 ...ef\lo#1#2#3#4#5#6#7#8#8
#9#{\relax}
! You already have nine parameters.
l.356 ...\lo#1#2#3#4#5#6#7#8#8#9
#{\relax}
Runaway argument?
{
! Paragraph ended before \b was complete.
<to be read again>
\par
l.357 ...ndefined}{\l\par\b{\par
% occurrence of \par aborts ...
Loose \hbox (badness 75) in paragraph at lines 347--357
[]
! Missing \else{} inserted for \case.
<to be read again>
\case
l.359 \case0{}\case
5 % missing elses
! Missing \else{} inserted for \case.
<to be read again>
\chcode
l.360 \chcode
`↑↑C = 6 % another parameter symbol
Runaway preamble?
! Forbidden control sequence found while scanning preamble of \↑↑C.
<to be read again>
\cr }
<to be read again>
\lo
l.363 \↑↑C{\lo
#\cr............89{}\cr} % runaway in preamble?
! Missing # inserted in alignment preamble.
<to be read again>
\cr
<to be read again> \cr
}
<to be read again>
\lo
l.363 \↑↑C{\lo
#\cr............89{}\cr} % runaway in preamble?
! There's no \halign or \valign going on.
l.363 ...#\cr............89{}\cr
} % runaway in preamble?
! Too many }'s.
l.363 ...\cr............89{}\cr}
% runaway in preamble?
! Illegal parameter number in definition of \a.
<to be read again>
2
l.364 \def\a↑↑C1{\d#1\d\l{#2
}\l#1\par\a↑↑@↑↑@a#1\par# % runaw...
Runaway definition?
↑↑C1->\d ↑↑C1\d \l {##2}\l ↑↑C1\par
! Forbidden control sequence found while scanning definition of \a.
<to be read again>
}
<to be read again>
\a↑↑@↑↑@a
l.364 ...\l{#2}\l#1\par\a↑↑@↑↑@a
#1\par# % runaway in definiti...
Runaway definition?
↑↑C1->↑↑C1↑↑C11\par
! Forbidden control sequence found while scanning definition of \a.
<to be read again>
}
<to be read again>
\a↑↑@↑↑@a
l.365 ...\l{#2}\l#1\par\a↑↑@↑↑@a
#1\par# % runaway in definiti...
Runaway argument?
{
! Forbidden control sequence found while scanning use of \a↑↑@↑↑@a.
<to be read again>
\par
<to be read again>
\lo
l.366 ↑↑?a↑↑@↑↑@a\par{\lo
\par % runaway in use
Runaway argument?
! Forbidden control sequence found while scanning use of \lo.
<to be read again>
\par
<to be read again>
\lo
l.367 \lo
\par\par\par\par\par\par\par\par\par\par89{}
! Incompatible glue units.
l.368 ...ip3=5mu plus \muskip100
! Incompatible glue units.
l.368 ...ip3=5mu plus \muskip100
! Incompatible glue units.
l.369 \advmuskip3 by \skip100
> 0.0mu minus 0.00003fil.
l.372 \showthe\muskip3
! Arithmetic overflow.
l.373 \divcount88 By 0
! Missing `by'.
<to be read again>
↑
l.375 ↑
\mskip\muskip3M\nonscript\hskip\the\thinmuskip
! Missing $ inserted.
<to be read again>
↑
l.375 ↑
\mskip\muskip3M\nonscript\hskip\the\thinmuskip
! Missing { inserted.
<to be read again>
\mskip
l.375 ↑\mskip
\muskip3M\nonscript\hskip\the\thinmuskip
! Incompatible glue units.
l.375 ...pt\hskip\the\thinmuskip
! Missing $ inserted.
<to be read again>
\par
l.376
! Missing } inserted.
<to be read again>
}
<to be read again>
$
<to be read again>
\par
l.376
Loose \hbox (badness 80) in paragraph at lines 375--376
[]$[]$
! You can't use `\vfill' in restricted horizontal mode.
l.377 {\setbox3\hbox{\vfill
}\vsplit 3 0pt}
! Missing `to' inserted.
<to be read again>
0
l.377 ...hbox{\vfill}\vsplit 3 0
pt}
! \vsplit needs a \vbox.
<to be read again>
}
l.377 ...x{\vfill}\vsplit 3 0pt}
! Parameters must be numbered consecutively.
<to be read again>
2
l.378 \def\a#2
{}
! Not a control sequence.
<to be read again>
A
l.379 \show A
> \a↑↑@↑↑@a=\outer macro:
#1\par #2->.
l.380 \show\a↑↑@↑↑@a
> (=macro:
->\delimiter "4162362 .
l.381 \show (
> \lo=\long\outer macro:
#1#2#3#4#5#6#7#8#989#{->\relax {.
l.382 \show\lo
> \↑↑C=\halign.
l.383 \show\↑↑C
> \batchmode=\batchmode.
l.384 \show\batchmode
> \error=undefined.
l.385 \show\error
> {\tracingcommands 0\showthe \outputpenalty \showboxbreadth 9999 \showb
oxdepth 9999 {\setbox 254=\box 255\shipout \copy 254} \ifabsent 254{\rel
ax } \else {\error } }.
l.386 \showthe\output
> 1.0mu plus 2.0fill minus 3.0mu.
l.387 \showthe\thinmuskip
> -2.0pt.
l.388 \showthe\texinfo 100 1
! Incomplete \if.
<to be read again>
\par
l.389 ...T\span{}\else{\if T\par
\if\span % aborted
Loose \hbox (badness 70) in paragraph at lines 379--389
[]\:0 A
! Incomplete \if.
<to be read again>
\span
l.389 ...else{\if T\par \if\span
% aborted
! There's no \halign or \valign going on.
l.389 ...else{\if T\par \if\span
% aborted
! Missing = inserted for \ifdim.
<to be read again>
1
l.390 \ifdim72pt1
in}}
! Missing { inserted.
l.390 \ifdim72pt1in}
}
! Missing \else{} inserted.
<to be read again>
}
l.390 \ifdim72pt1in}}
> 0.0pt.
l.393 \showthe\hangindent
\showthe\hangafter}\showthe\hangin...
> 0.
l.393 ...ndent\showthe\hangafter
}\showthe\hangindent\showthe\...
> 2.0pt.
l.393 ...ter}\showthe\hangindent
\showthe\hangafter
> 1.
l.393 ...ndent\showthe\hangafter
! You can't use `\mark' in math mode.
l.395 $\mark
\vadjust\insert&\input\hrule\moveleft\indent % ca...
! You can't use `\vadjust' in math mode.
l.395 $\mark\vadjust
\insert&\input\hrule\moveleft\indent % ca...
! You can't use `\insert' in math mode.
l.395 $\mark\vadjust\insert
&\input\hrule\moveleft\indent % ca...
! There's no \halign or \valign going on.
l.395 $\mark\vadjust\insert&
\input\hrule\moveleft\indent % ca...
! You can't use `\input' in math mode.
l.395 ...k\vadjust\insert&\input
\hrule\moveleft\indent % can'...
! You can't use `\hrule' in math mode.
l.395 ...ust\insert&\input\hrule
\moveleft\indent % can't do t...
! You can't use `\moveleft' in math mode.
l.395 ...t&\input\hrule\moveleft
\indent % can't do that in ma...
! You can't use `\indent' in math mode.
l.395 ...t\hrule\moveleft\indent
% can't do that in math mode
! You can't use `\unbox' in math mode.
l.396 \unbox
\accent\valign\vfill\vfil\vfilneg\vss % likewise;...
! You can't use `\accent' in math mode.
l.396 \unbox\accent
\valign\vfill\vfil\vfilneg\vss % likewise;...
! You can't use `\valign' in math mode.
l.396 \unbox\accent\valign
\vfill\vfil\vfilneg\vss % likewise;...
! Missing $ inserted.
<to be read again>
\vfill
l.396 \unbox\accent\valign\vfill
\vfil\vfilneg\vss % likewise;...
Loose \hbox (badness 91) in paragraph at lines 394--396
[]$$
! Missing { inserted.
l.397 \def\a}
! Infinite glue shrinkage found on current page.
<to be read again>
$
l.402 \ifvmode{$
\ifmmode{\hbox\ifhmode{\hfilneg}\else{\error}...
! Missing { inserted.
<to be read again>
\ifhmode
l.402 ...$\ifmmode{\hbox\ifhmode
{\hfilneg}\else{\error}}$ % m...
! Missing } inserted.
<to be read again>
}
<to be read again>
$
l.402 ...hfilneg}\else{\error}}$
% missing { and }\else
! Missing \else{} inserted.
<to be read again>
$
l.402 ...hfilneg}\else{\error}}$
% missing { and }\else
! Extra \else.
l.403 \else
\noalign\omit % these are extra
! Misplaced \noalign.
l.403 \else\noalign
\omit % these are extra
! Misplaced \omit.
l.403 \else\noalign\omit
% these are extra
! Undefined font code (1000).
l.404 \texinfo 1000
1000=20vu\showthe\texinfo 10 1000
! Font 0 has 13 texinfo parameters.
l.404 ...showthe\texinfo 10 1000
> 0.0pt.
l.404 ...showthe\texinfo 10 1000
Loose \hbox (badness 91) in paragraph at lines 402--406
[]$[]$
! Incompatible magnification (1999);
the previous value will be retained (2000).
<to be read again>
m
l.407 \halign to 1truem
m{\l{#}\cr
! Extra alignment tab has been changed to \cr.
<template> }\ENDTEMPLATE.
l.408 $&
.}
! Missing } inserted.
<to be read again>
}
<to be read again>
\par
l.409
! Missing \cr inserted.
<to be read again>
\cr
<to be read again>
}
<to be read again>
\par
l.409
! Missing { inserted.
<to be read again>
\cr
<to be read again>
}
<to be read again>
\par
l.409
Tight \hbox (badness 7) detected at line 409
[]
! You can't use `\prevdepth' in restricted horizontal mode.
l.410 ...textfont3=100\prevdepth
\xspaceskip0pt\spacefactor200...
! Missing \right. inserted.
<to be read again>
\right .
<to be read again>
$
l.411 ...iterfactor1600\left(Aa$
}
! Bad number (100).
l.413 {\ifeof 15{\openin 100
tripos
> \a=macro:
->\par .
\loop ...l \read 0 \a }\show \a
}\loop
l.415 \chcode`015\loop
}\else{}}
! Text line contains an invalid character.
<read 0> \uppercase {0
\outputpenalty }
\loop ...e {{\global \read 0 \a
}\show \a }\loop
l.415 \chcode`015\loop
}\else{}}
> \a=macro:
->\uppercase {\outputpenalty } .
\loop ...l \read 0 \a }\show \a
}\loop
l.415 \chcode`015\loop
}\else{}}
> \a=macro:
->\uppercase {mmmmmmmmmm} .
\loop ...l \read 0 \a }\show \a
}\loop
l.415 \chcode`015\loop
}\else{}}
> \a=macro:
->\par .
\loop ...l \read 0 \a }\show \a
}\loop
l.415 \chcode`015\loop
}\else{}}
! Use of \↑↑@ doesn't match its definition.
l.420 \relax
\chcode`\↑↑M=13 \defqqM{\relax}#\groupbegin
! You can't use `macro parameter character #' in vertical mode.
l.420 ...↑↑M=13 \def↑↑M{\relax}#
\groupbegin
! Argument of \l has an extra }.
<to be read again>
\par
<to be read again>
}
<to be read again> }
\endwrite
l.422 ...10{\string\caution \l}
% living dangerously
Runaway argument?
! Paragraph ended before \l was complete.
<to be read again>
\par
<to be read again>
}
<to be read again> }
\endwrite
l.422 ...10{\string\caution \l}
% living dangerously
\caution\par
! You can't use `\end' in internal vertical mode.
<output> ... 0by1\unbox 255\end
}
<to be read again>
\end
l.423 \end
! You can't use `\end' in internal vertical mode.
<output> ... 0by1\unbox 255\end
}
<to be read again>
\end
l.423 \end
! \output loop---2 consecutive dead cycles.
<to be read again>
\end
l.423 \end
Completed box being shipped out [0.2.-1118806.0.11.196608.327680.1572864
.1073741823]
Memory usage before: 561&251; after: 107&236; max so far: 2111&448
(\end occurred inside a group at level 1)
Statistics for this run:
1135 strings of total length 22915
...TeX capacity is currently 3000 31000
Maximum memory usage 2111&448
...TeX capacity is currently 2200&801
268 multiletter control sequences
...TeX capacity is currently 2100
724 words of font info for 4 fonts
...TeX capacity is currently 15000 75
2 hyphenation exceptions
...TeX capacity is currently 307
Maximum stack usage 5i,7n,9p,121b,34s
...TeX capacity is currently 80i,40n,30p,500b,300s
Output written on TRIP.DVI (15 pages, 2728 bytes).